Premium Information is available for this item - Upgrade for $1 a day
5310-00-680-6279
Flat Washer
5310006806279 006806279 9523759
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
23
Marketplace 5310-00-680-6279
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-680-6279 3+ Documents (More...)
Updated Every Day 5310-00-680-6279 RQST NE Updated Every Day 5310-00-680-6279 RQST Updated Every Day
/fsg-53/fsc-5310/us 5310-00-680-6279 Flat Washer 5310006806279 006806279,9523759 9523759 A washer having
FLAT 17 EA https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-680-6279 Flat Washer 5310006806279 006806279,9523759
WASHER,FLAT 8 EA NS Request Quotation Subscribe to View Vendor Details... 9523759 WASHER,FLAT 9 EA NS
006806279,9523759 WASHER,FLAT 8 Subscribe to View Vendor Details... 9523759 WASHER,FLAT 17 EA https/
/www.nsnlookup.com /fsg-53/fsc-5310 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-680-6279 Flat
Restrictions 5310-00-680-6279
5310-00-680-6279 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-680-6279
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-680-6279
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Aug 2000
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Jan 1997
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5310-00-680-6279
- Part Number
- Manufacturer
- Status
- 9523759
- Manufacturer
- 73842 - Goodyear Tire And Rubber Co The (Active)
- Primary Buy
- Primary Buy
- 9523759
- 0B9R9 - Meggitt Aircraft Braking Systems (Active)
- Secondary Buy
- Secondary Buy
- 9523759
- 23842 - Lukens General Industries Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-680-6279
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 27.0 Rockwell C Minimum And 33.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.315 Inches Minimum And 0.324 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 4130 Overall
- Minimum Tensile Strength [CQBC]
- 126000 Pounds Per Square Inch
- Overall Diameter [ADAV]
- 0.615 Inches Minimum And 0.635 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.104 Inches Minimum And 0.114 Inches Maximum
Weapon Systems (WSDC) 5310-00-680-6279
DLA Procurement Analysis 5310-00-680-6279
- Last Stock Position:
- 955 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-680-6279
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-680-6279
Freight Information 5310-00-680-6279
5310-00-680-6279 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-680-6279 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-680-6279 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-680-6279 is not classified as a special type of cargo when transported by water. 5310-00-680-6279 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-680-6279
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-680-6279 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A522P4291P00001
- 04 Feb 2022
- Subscribe
- 1035
- Subscribe
- Subscribe
- Subscribe
- SPE4A518F07X3
- 26 Jul 2018
- Subscribe
- 297
- Subscribe
- Subscribe
- Subscribe
- SPE4AX13D94180613
- 10 May 2016
- Subscribe
- 269
- Subscribe
- Subscribe
- Subscribe
- SPE4AX13D94180351
- 07 Jul 2015
- Subscribe
- 203
- Subscribe
- Subscribe
- Subscribe
- SPE4AX13D94180271
- 12 Dec 2014
- Subscribe
- 359
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5310-00-680-6279 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: