Premium Information is available for this item - Upgrade for $1 a day
5310-00-676-8067
Flat Washer
5310006768067 006768067 704420 628946
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
22
Marketplace 5310-00-676-8067
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-676-8067 5+ Documents (More...)
Restrictions 5310-00-676-8067
5310-00-676-8067 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-00-676-8067
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-00-676-8067
- Part Number
- Manufacturer
- Status
- 628946
- Manufacturer
- 34830 - Rogerson Kratos (Active)
- Primary Buy
- Primary Buy
- 628946
- 81924 - Atomic Energy Commission (Active)
- Primary Buy
- Primary Buy
- 628946
- 27068 - Colonial Spring Co., Ltd. (Active)
- Secondary Buy
- Secondary Buy
- 704420
- 77445 - Rtx Corporation (Active)
- Secondary Buy
- Secondary Buy
- 628946
- 59420 - Dynamic Gunver Technologies Llc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 704420
- 59420 - Dynamic Gunver Technologies Llc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 628946
- 98003 - Nielsen Hardware Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 704420
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 628946
- 11449 - Turbo Power & Marine System Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 628946
- 03730 - Gould E A And Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 628946
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 704420
- 1J4P3 - Paradigm Manchester Inc. (Active)
- Advisory Reference
- Advisory Reference
- 628946
- 1J4P3 - Paradigm Manchester Inc. (Active)
- Advisory Reference
- Advisory Reference
- 628946
- 1RRL5 - Nielsen Hardware Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-676-8067
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Hole Diameter [AAUB]
- 0.281 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Material Document And Classification [MDCL]
- Ams 5613 Assn Std Single Material Response Or Ams 5504 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 0.428 Inches Minimum And 0.448 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 63.0 Microinches Bottom
- Surface Finish [CSYM]
- 63.0 Microinches Top
- Thickness [ABNM]
- 0.071 Inches Minimum And 0.078 Inches Maximum
DLA Procurement Analysis 5310-00-676-8067
Management Data 5310-00-676-8067
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-676-8067
Freight Information 5310-00-676-8067
5310-00-676-8067 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-676-8067 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-676-8067 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-676-8067 is not classified as a special type of cargo when transported by water. 5310-00-676-8067 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-676-8067 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: