Premium Information is available for this item - Upgrade for $1 a day
5310-00-639-7699
Flat Washer
5310006397699 006397699 106
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
7
Marketplace 5310-00-639-7699
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-639-7699 3+ Documents (More...)
Restrictions 5310-00-639-7699
5310-00-639-7699 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-639-7699
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-639-7699
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-639-7699
- Part Number
- Manufacturer
- Status
- 106
- Manufacturer
- 84760 - Stanadyne Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-639-7699
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Comp 1212 Overall
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Overall
- Hole Diameter [AAUB]
- 0.406 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.937 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.187 Inches Nominal
NATO Stock Numbers Related to 5310-00-639-7699
Freight Information 5310-00-639-7699
5310-00-639-7699 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-639-7699 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-639-7699 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-639-7699 is not classified as a special type of cargo when transported by water. 5310-00-639-7699 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.