Premium Information is available for this item - Upgrade for $1 a day
5310-00-637-8350
Sleeve Nut
5310006378350 006378350 G372-33 00265-2 ML620-33
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
20
Marketplace 5310-00-637-8350
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-637-8350 3+ Documents (More...)
ML620-33 NUT,SLEEVE 23 EA NS Request Quotation G372-33 NUT,SLEEVE 4 EA NS Request Quotation Subscribe
G372-33 NUT,SLEEVE 9 EA NS Request Quotation Updated Every Day 5310-00-637-8350 RQST NE Updated Every
Every Day 4310-37-556-2005 RQST NE Restrictions https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-637-8350
Sleeve Nut 5310006378350 006378350,G372-33 NUT,SLEEVE 4 EA NS Request Quotation Subscribe https
www.nsnlookup.com /fsg-53/fsc-5342/us 5342-00-922-1421 Special * Latch 5342009221421009221421 215-00265-2
Restrictions Approved Sources Datasheet Management https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-637-8350
Restrictions 5310-00-637-8350
5310-00-637-8350 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-637-8350
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-637-8350
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Jan 2011
- Thailand (YY01)
- Effective Date:
- 1 Feb 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-637-8350
- Part Number
- Manufacturer
- Status
- G372-33
- Manufacturer
- 26512 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 00265-2
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ML620-33
- 55482 - Mount Lok Products Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-637-8350
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Counterbore Diameter [AAWY]
- 0.168 Inches Minimum Nut And 0.174 Inches Maximum Nut
- Cross-Sectional Shape [ANLR]
- Round Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Diameter [ABKK]
- 0.344 Inches Nominal
- Flange Thickness [ABKU]
- 0.063 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/5,Temper T4 Fed Spec 1St Material Response Overall Or Qq-A-200/3,Temper T4 Fed Spec 2Nd Material Response Overall Or Qq-A-225/6 Fed Spec 2Nd Material Response Overall Or Qq-A-200/3,Temper T3511 Fed Spec 2Nd Material Response Overall
- Material [MATT]
- Aluminum Alloy 2017 Overall Or Aluminum Alloy 2024 Overall
- Nominal Thread Size [CQJX]
- 0.164 Inches
- Nut Counterbore Depth [ADFK]
- 0.359 Inches Nominal Nut
- Nut Diameter [ACTD]
- 0.217 Inches Minimum And 0.221 Inches Maximum
- Nut Length [ACVN]
- 0.514 Inches Minimum And 0.518 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Ty 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series [BZRR]
- Unc
Weapon Systems (WSDC) 5310-00-637-8350
DLA Procurement Analysis 5310-00-637-8350
- Last Stock Position:
- 3808 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-637-8350
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-637-8350
Freight Information 5310-00-637-8350
5310-00-637-8350 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5310-00-637-8350 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5310-00-637-8350 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-637-8350 is not classified as a special type of cargo when transported by water. 5310-00-637-8350 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-637-8350
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-637-8350 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: