Premium Information is available for this item - Upgrade for $1 a day

5310-00-628-3834

Flat Washer

5310006283834 006283834 40-0001541 20138A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-00-628-3834 WASHER,FLAT 5310006283834 006283834

Managed by United States
NSN Created on 12 Mar 1975
Data Last Changed
May 2023
NATO Update Count
7
NATO Data Quality
AAGR Style 1 for 5310-00-628-3834 1/3
NSN 5310-00-628-3834 (Identification) 1/3
ABMW Style 1 for 5310-00-628-3834 2/3
NSN 5310-00-628-3834 (Identification) 2/3
ABMX Style 1 for 5310-00-628-3834 3/3
NSN 5310-00-628-3834 (Identification) 3/3

5310-00-628-3834 Stock and Availability Marketplace 5310-00-628-3834

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-00-628-3834 RQST NE eBay
eBay Updated Every Day
5310-00-628-3834 RQST eBay
Amazon Updated Every Day
5310-00-628-3834 RQST NE Amazon

5310-00-628-3834 Related Documents Related Documents 5310-00-628-3834 5+ Documents (More...)

| RNVC: 2 | DAC: 3 9 Mar 2006 8405-40-000-1541 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-628-3834
Flat Washer 5310006283834 006283834 5310-00-628-3834 5310006283834 006283834 is a washer having
1005-01-503-0016 1005015030016 015030016 is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. it may be provided with a hood or protective wings.
7220-21-910-9455 7220219109455 219109455 is a piece of floor covering of definite size and shape. it is made of a variety of materials. does not include matting, floor. exclude: mat, electrostatic discharging
CAGE 20138 Sullivan N J Co Inc in Sterling, VA United States

5310-00-628-3834 Demil Restrictions 5310-00-628-3834

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: U | EDC: | ADPEC:

5310-00-628-3834 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

5310-00-628-3834 HTS and ScheduleB Import and Export 5310-00-628-3834

5310-00-628-3834 End Users End Users 5310-00-628-3834

US Army (A919)
Effective Date:
1 Mar 2006
Former MOE Rule:
A187
Supplementary Receivers:
AJCLBD
US Air Force (FXGI)
Effective Date:
1 Mar 2006
Former MOE Rule:
FXKZ
US Marine Corps (MC47)
Effective Date:
1 Mar 2006
Former MOE Rule:
MC10
US Navy (N9BZ)
Effective Date:
1 Dec 2013
Supplementary Collaborators:
GG
United Kingdom (ZK01)
Effective Date:
1 Jul 2000

5310-00-628-3834 Manufacturers Approved Sources 5310-00-628-3834

5310-00-628-3834 Technical Data Datasheet 5310-00-628-3834

Characteristic
Specifications
FIIG
A022B0
Center Hole Shape Style [ABMX]
Round
Cross-Sectional Shape Style [AAGR]
Rectangular
Hole Diameter [AAUB]
0.344 Inches Nominal
Material [MATT]
Steel Overall
Overall Diameter [ADAV]
0.688 Inches Nominal
Peripheral Shape Style [ABMW]
Round
Surface Treatment [SFTT]
Zinc Overall
Thickness [ABNM]
0.062 Inches Nominal

5310-00-628-3834 Stock, Inventory and Procurement DLA Procurement Analysis 5310-00-628-3834

DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5310-00-628-3834 Management Data Management Data 5310-00-628-3834

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
US Marine Corps (DM)
EA
Subscribe
1
Oct 2021
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2020
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2019
Department of the Air Force (DF)
EA
Subscribe
1

Army Army

Materiel Category and Inventory Manager:
T
Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Aggregation Code:
SX
SICA RESIDUAL MMAC-OC-ALC
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

Marine Corps Marine Corps

Stores Account:
1
Stock Fund Account Item
Combat Essentiality:
5
Critical Repair Part to a Combat Essential End Item
Echelon Management:
B2
Material Identification:
B
Consumable Repair Parts
Operational Test:
No Special Procedures
Physical Category:
1
Bin

5310-00-628-3834 Related Items NATO Stock Numbers Related to 5310-00-628-3834

5310-00-628-3834 Freight Data Freight Information 5310-00-628-3834

5310-00-628-3834 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-628-3834 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-628-3834 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-628-3834 is not classified as a special type of cargo when transported by water. 5310-00-628-3834 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5310-00-628-3834 Packaging Data Packaging Data 5310-00-628-3834

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
2lb or less, one dimension 2" or less, other dimensions less than 24"
Above 110G
No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
--
--
--
Physical Protection
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
No Requirement
No Requirement
Not Applicable
Any Suitable Container
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
--

5310-00-628-3834 Procurement History Procurement History 5310-00-628-3834 1 Records

Contract
Date
CAGE
Quantity
Net Price
Std Price
SPE5E719V0035
02 Oct 2018
Subscribe
100
Subscribe
Subscribe

5310-00-628-3834 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5310-00-628-3834 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
N

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: