5310-00-619-1148

Flat Washer

5310006191148 006191148 FF-E-92 2468833-6 70077-0257 842555 2556G-16 1737102-136 344-02024 946008-8080 P130005208 MS16996-9 MS15795-808 A05205 0716638 410030073 004-002853-808 571741H3 52813AX 4197500-015 12Z3035-430 ASC1538433 4912548-03 946008-1408 8924401-6 503010

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer