Premium Information is available for this item - Upgrade for $1 a day
5310-00-618-9446
Flat Washer
5310006189446 006189446 354290 306084 CVC754-328E17
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
11
Marketplace 5310-00-618-9446
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-618-9446 5+ Documents (More...)
AssyUOMTechnical DocumentQuantative ExpressionDefense Logistics Agency (DS)IZDiscontinued-Use 5310-00-618-9446
Restrictions 5310-00-618-9446
5310-00-618-9446 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-618-9446
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-618-9446
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- KE
- Greece (ZU)
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- United States of America (ZZ)
Approved Sources 5310-00-618-9446
- Part Number
- Manufacturer
- Status
- 354290
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 354290
- 27068 - Colonial Spring Co., Ltd. (Active)
- Secondary Buy
- Secondary Buy
- 354290
- JA269 - Tokyo Judoi Kogyo K.K. (Active)
- Secondary Buy
- Secondary Buy
- 354290
- 33615 - Enjet Aero Manchester Llc (Active)
- Secondary Buy
- Secondary Buy
- 354290
- 31633 - Alinabal Holdings Corporation (Active)
- Secondary Buy
- Secondary Buy
- 354290
- 51535 - Crest Good Manufacturing Co Inc (Active)
- Secondary Buy
- Secondary Buy
- 306084
- JA269 - Tokyo Judoi Kogyo K.K. (Active)
- Secondary Buy
- Secondary Buy
- 354290
- 81924 - Atomic Energy Commission (Active)
- Secondary Buy
- Secondary Buy
- 306084
- 77445 - Rtx Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CVC754-328E17
- 80378 - Triumph Aerostructures, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 306084
- 06090 - Te Connectivity Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 306084
- S0554 - Tokyo Judogi Kogyo Co. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 354290
- S0554 - Tokyo Judogi Kogyo Co. (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-618-9446
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.276 Inches Minimum And 0.286 Inches Maximum
- Material [MATT]
- Aluminum Alloy 1100 Overall
- Heat Treatment [HEAT]
- F-As Fabricated
- Material Document And Classification [MDCL]
- Ams 4001 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 0.430 Inches Minimum And 0.450 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 63.0 Microinches Bottom
- Surface Finish [CSYM]
- 63.0 Microinches Top
- Thickness [ABNM]
- 0.045 Inches Minimum And 0.055 Inches Maximum
Weapon Systems (WSDC) 5310-00-618-9446
DLA Procurement Analysis 5310-00-618-9446
Management Data 5310-00-618-9446
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-618-9446
Freight Information 5310-00-618-9446
5310-00-618-9446 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-618-9446 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-618-9446 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-618-9446 is not classified as a special type of cargo when transported by water. 5310-00-618-9446 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-618-9446 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: