Premium Information is available for this item - Upgrade for $1 a day
5310-00-596-6337
Sleeve Nut
5310005966337 005966337 642912
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
10
Marketplace 5310-00-596-6337
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-596-6337 3+ Documents (More...)
6337 RQST NE Updated Every Day 5310-00-596-6337 RQST Updated Every Day 5310-00-596-6337 RQST NE Related
Documents 5310-00-596-6337 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310
Sleeve Nut 5310005966337 005966337,642912 NUT,SLEEVE 94 EA NS Request Quotation Subscribe to View
Vendor Details... 642912 NUT,SLEEVE 99 EA NS to View Vendor Details... 642912 NUT,SLEEVE 1 EA NS Request
PLE,IGLASS DROPPER 94 EA NS Request Quotation Subscribe to View Vendor Details... 642912 PLE,IGLASS
DROPPER 99 EA NS Request Quotation Subscribe to View Vendor Details... 642912 PLE,IGLASS DROPPER 2 EA
Restrictions 5310-00-596-6337
5310-00-596-6337 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-596-6337
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-596-6337
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Republic of Korea (ZH01)
- Effective Date:
- 1 Jan 2011
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-596-6337
- Part Number
- Manufacturer
- Status
- 642912
- Manufacturer
- 88818 - Kearfott Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-596-6337
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Boss Diameter [ADBN]
- 0.242 Inches Minimum And 0.245 Inches Maximum
- Boss Thickness [ADBP]
- 0.032 Inches Nominal
- Cross-Sectional Shape [ANLR]
- Round Boss
- Cross-Sectional Shape [ANLR]
- Round Nut
- Material [MATT]
- Steel Overall
- Nominal Thread Size [CQJX]
- 0.203 Inches
- Nut Diameter [ACTD]
- 0.305 Inches Minimum And 0.308 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.053 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Mil-T-10727,Ty 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Tin Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 80
- Thread Series [BZRR]
- Uns
Weapon Systems (WSDC) 5310-00-596-6337
DLA Procurement Analysis 5310-00-596-6337
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-596-6337
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-00-596-6337
Freight Information 5310-00-596-6337
5310-00-596-6337 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-596-6337 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-596-6337 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-596-6337 is not classified as a special type of cargo when transported by water. 5310-00-596-6337 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-596-6337
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-596-6337 1 Records
Contracting Technical Data File (CTDF) 5310-00-596-6337 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: