Premium Information is available for this item - Upgrade for $1 a day
5310-00-548-4702
Sleeve Nut
5310005484702 005484702 4037T84P02 4037T84P03 4037T84P04 H49815-3 0617917 74740-1032 E11116-3
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
13
Marketplace 5310-00-548-4702
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-548-4702 4+ Documents (More...)
United States (US) 4. 5310-00-548-4702 Marketplace Restrictions Approved Sources Datasheet Management
Day 5310-00-548-4702 RQST NE Updated Every Day 5310-00-548-4702 RQST Updated Every Day 5310-00-548-4702
Sleeve Nut 5310005484702 005484702 -00-548-4702Sleeve Nut5310005484702 005484702 4037T84P02 4037T84P04
4037T84P03 H49815-3 0617917 74740-1032 RNVC 9 DAC 5 0617917 56878 - Sps Technologies, Llc (Active) Canceled
E11116-3 NUT,SLEEVE 289 EA NS Request Quotation Subscribe to View Vendor Details...
E11116-3 NUT,SLEEVE 250 EA NS Request Quotation Updated Every Day 5310-00-567-4036 RQST Updated Every
Sleeve Nut 5310005484702 005484702 4702Sleeve Nut5310005484702 005484702 4037T84P02 4037T84P04
4037T84P03 H49815-3 0617917 74740-1032 E11116 RNVC 9 DAC 5 74740-1032 56878 - Sps Technologies, Llc (
Restrictions 5310-00-548-4702
5310-00-548-4702 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-548-4702
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-548-4702
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Aug 2015
Approved Sources 5310-00-548-4702
- Part Number
- Manufacturer
- Status
- 4037T84P04
- Manufacturer
- 99207 - General Electric Company (Active)
- Primary Buy
- Primary Buy
- 4037T84P03
- 15653 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 4037T84P04
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- H49815-3
- 15653 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 0617917
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 74740-1032
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- E11116-3
- 72962 - Harvard Industries Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 4037T84P03
- 99207 - General Electric Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4037T84P02
- 99207 - General Electric Company (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-548-4702
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Counterbore Diameter [AAWY]
- 0.255 Inches Minimum Nut And 0.260 Inches Maximum Nut
- Cross-Sectional Shape [ANLR]
- Hexagonal Flange
- Cross-Sectional Shape [ANLR]
- Round Nut
- Flange Width Across Flats [AFGG]
- 0.336 Inches Minimum And 0.345 Inches Maximum
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches
- Nut Counterbore Depth [ADFK]
- 0.075 Inches Minimum Nut And 0.085 Inches Maximum Nut
- Nut Diameter [ACTD]
- 0.280 Inches Maximum
- Nut Style [ACTA]
- Sleeve
- Nut Length [ACVN]
- 0.120 Inches Minimum And 0.125 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5735 Assn Std Single Material Response Overall
- Thread Class [AAJD]
- 3B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series [BZRR]
- Unjf
Weapon Systems (WSDC) 5310-00-548-4702
DLA Procurement Analysis 5310-00-548-4702
- Last Stock Position:
- 8959 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-548-4702
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- SN
- Jet Engines (TF34-GE-2)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5310-00-548-4702
Freight Information 5310-00-548-4702
5310-00-548-4702 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-548-4702 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-548-4702 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-548-4702 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-548-4702 is not classified as a special type of cargo when transported by water. 5310-00-548-4702 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-548-4702
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-548-4702 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: