Premium Information is available for this item - Upgrade for $1 a day
5310-00-543-4739
Flat Washer
5310005434739 005434739 S124682-4D16-3 CVC754-164D17
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
13
Marketplace 5310-00-543-4739
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-543-4739 4+ Documents (More...)
/fsg-31/fsc-3120/us
Restrictions 5310-00-543-4739
5310-00-543-4739 is a Flat Washer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-543-4739
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-543-4739
- US Air Force (FBB5)
- Effective Date:
- 1 Nov 2004
- Former MOE Rule:
- FXKZ
- France (ZF01)
- Effective Date:
- 1 Jun 2015
Approved Sources 5310-00-543-4739
- Part Number
- Manufacturer
- Status
- S124682-4D16-3
- Manufacturer
- 88277 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- CVC754-164D17
- 80378 - Triumph Aerostructures, Llc (Active)
- Primary Buy
- Primary Buy
- S124682-4D16-3
- 0TSU7 - Moen Gilbert H Co (Active)
- Primary Buy
- Primary Buy
- S124682-4D16-3
- 10630 - Anillo Industries Inc (Active)
- Advisory Reference
- Advisory Reference
- S124682-4D16-3
- 70265 - All Power Manufacturing Co. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-543-4739
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.266 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/6 Alloy 20249 Fed Spec 1St Material Response Overall Or Ecl-33,Bendix Corp Fed Spec 2Nd Material Response Overall
- Material [MATT]
- Aluminum Alloy Overall
- Overall Diameter [ADAV]
- 1.000 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- Cva9-4 Mfr Ref 1St Treatment Response Overall Or Cva9-18 80378 Mfr Ref 2Nd Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall Or Chromate Overall
- Thickness [ABNM]
- 0.025 Inches Nominal
Management Data 5310-00-543-4739
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Nov 2018
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- BA
- C-17 PROGRAM
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5310-00-543-4739
Freight Information 5310-00-543-4739
5310-00-543-4739 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-543-4739 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-543-4739 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-543-4739 is not classified as a special type of cargo when transported by water. 5310-00-543-4739 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-543-4739
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --