Premium Information is available for this item - Upgrade for $1 a day
5310-00-537-2652
Flat Washer
5310005372652 005372652 19021
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
10
Marketplace 5310-00-537-2652
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-537-2652 5+ Documents (More...)
RQST NE Updated Every Day 5310-00-537-2652 RQST Updated Every Day 5310-00-537-2652 RQST NE Related
Documents 5310-00-537-2652 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310
ITEM 4 54-3069 19021 An item which attaches the filtration device, such REVISION 1 SHEET 1 FIND 4 19021
ITEM 4 54-3069 19021 An item which attaches the filtration device, such REVISION 1 SHEET 1 FIND 4 19021
ITEM 4 54-3069 19021 An item which attaches the filtration device, such REVISION 1 SHEET 1 FIND 4 19021
ITEM 4 54-3069 19021 An item which attaches the filtration device, such https//www.nsnlookup.com /fsg
1 SHEET 1 FIND 4 19021 ITEM 4 54-3069 19021 An item which attaches the filtration device, such REVISION
1 SHEET 1 FIND 4 19021 ITEM 4 54-3069 19021 ITEM 4 54-3069 19021 An item which attaches the filtration
REVISION 1 SHEET 1 FIND 4 19021 ITEM 4 54-3069 19021 An item which attaches the filtration device, such
Flat Washer 5310005372652 005372652,19021 item which attaches the filtration device, such REVISION
Restrictions 5310-00-537-2652
5310-00-537-2652 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-537-2652
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-537-2652
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
Approved Sources 5310-00-537-2652
- Part Number
- Manufacturer
- Status
- 19021
- Manufacturer
- 70188 - Franklin Engine Co Inc (Obsolete)
- Original Design
- Original Design
Datasheet 5310-00-537-2652
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 85.0 Rockwell B Minimum And 100.0 Rockwell B Maximum
- Hole Diameter [AAUB]
- 0.391 Inches Nominal
- Material Document And Classification [MDCL]
- Sae Assn Std Single Material Response Overall
- Material [MATT]
- Steel Comp 1010 Overall
- Outside Left Corner Chamfer Angle [CQZT]
- 45.0 Degrees Nominal
- Outside Right Corner Chamfer Angle [CRFT]
- 45.0 Degrees Nominal
- Overall Diameter [ADAV]
- 0.750 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment [SFTT]
- Cadmium Overall
- Thickness [ABNM]
- 0.094 Inches Nominal
Similar Supply Items to 5310-00-537-2652
Freight Information 5310-00-537-2652
5310-00-537-2652 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-537-2652 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-537-2652 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-537-2652 is not classified as a special type of cargo when transported by water. 5310-00-537-2652 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-537-2652
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --