Premium Information is available for this item - Upgrade for $1 a day

5310-00-442-3287

Flat Washer

5310004423287 004423287 282-0160

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-00-442-3287 WASHER,FLAT 5310004423287 004423287

Managed by United States
NSN Created on 4 Apr 1969
Data Last Changed
May 2023
NATO Update Count
6
NATO Data Quality
AAGR Style 1 for 5310-00-442-3287 1/3
NSN 5310-00-442-3287 (Identification) 1/3
ABMW Style 1 for 5310-00-442-3287 2/3
NSN 5310-00-442-3287 (Identification) 2/3
ABMX Style 1 for 5310-00-442-3287 3/3
NSN 5310-00-442-3287 (Identification) 3/3

5310-00-442-3287 Stock and Availability Marketplace 5310-00-442-3287

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-00-442-3287 RQST NE eBay
eBay Updated Every Day
5310-00-442-3287 RQST eBay
Amazon Updated Every Day
5310-00-442-3287 RQST NE Amazon

5310-00-442-3287 Related Documents Related Documents 5310-00-442-3287 5+ Documents (More...)

United States Data Last Changed November 2023 NATO Update Count 2 NATO Data Quality NSN 5306-00-282-0160
United States (US) 4. 5306-00-282-0160 Marketplace Restrictions Approved Sources Datasheet Management
MS16992-522 SCREW,LAG 23 EA NS Request Quotation Updated Every Day 5306-00-282-0160 RQST Updated Every
equipment-intelligence/land/hmmwv/technical-manual TM-9-2320-280-24P HMMWV Repair Parts And Tools Volume 2 Page 950 282-0160
on 6 Jul 1988 Data Last Changed November 2023 NATO Update Count 4 NATO Data Quality NSN 4720-01-282-0160
United States (US) 4. 4720-01-282-0160 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 4720-01-282-0160 RQST Updated Every Day 4720-01-282-0160 RQST NE Related Documents
Request a Quotation from participating marketplace vendors Request Updated Every Day 5310-14-282-0160
RQST NE Updated Every Day 5310-14-282-0160 RQST Updated Every Day 5310-14-282-0160 RQST NE Related Documents
5950996320778 996320778 5950-99-632-0778 5950996320778 996320778 Restrictions 5310-14-282-0160 DEMIL
01-281-7798 498 12 5340-01-286-6191 62 11 4720-01-282-0143 496 22 5306-01-286-7182 203 25 4720-01-282-0160

5310-00-442-3287 Demil Restrictions 5310-00-442-3287

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: U | EDC: | ADPEC:

5310-00-442-3287 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

5310-00-442-3287 HTS and ScheduleB Import and Export 5310-00-442-3287

5310-00-442-3287 End Users End Users 5310-00-442-3287

US Air Force (FXGI)
Effective Date:
1 Mar 2006
Former MOE Rule:
FXKZ
US Navy (N9BZ)
Effective Date:
1 Mar 2006
Former MOE Rule:
N9ZD
Supplementary Collaborators:
HD
Spain (YB01)
Effective Date:
1 Apr 1991

5310-00-442-3287 Manufacturers Approved Sources 5310-00-442-3287

5310-00-442-3287 Technical Data Datasheet 5310-00-442-3287

Characteristic
Specifications
FIIG
A022B0
Center Hole Shape Style [ABMX]
Round
Cross-Sectional Shape Style [AAGR]
Rectangular
Hole Diameter [AAUB]
0.222 Inches Minimum And 0.246 Inches Maximum
Material [MATT]
Cork Overall
Material Document And Classification [MDCL]
Mil-G-12803 No. 52117-B Mil Spec Single Material Response Overall Or Hh-C-576 Ty 1B Cl 3 Fed Spec Single Material Response Overall
Overall Diameter [ADAV]
0.738 Inches Minimum And 0.762 Inches Maximum
Peripheral Shape Style [ABMW]
Round
Thickness [ABNM]
0.050 Inches Minimum And 0.074 Inches Maximum

5310-00-442-3287 Stock, Inventory and Procurement DLA Procurement Analysis 5310-00-442-3287

DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5310-00-442-3287 Management Data Management Data 5310-00-442-3287

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2021
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2020
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2019
Department of the Air Force (DF)
EA
Subscribe
1

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Aggregation Code:
SX
SICA RESIDUAL MMAC-OC-ALC
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

5310-00-442-3287 Related Items NATO Stock Numbers Related to 5310-00-442-3287

5310-00-442-3287 Freight Data Freight Information 5310-00-442-3287

5310-00-442-3287 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-442-3287 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-442-3287 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-442-3287 is not classified as a special type of cargo when transported by water. 5310-00-442-3287 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5310-00-442-3287 Packaging Data Packaging Data 5310-00-442-3287

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
2lb or less, one dimension 2" or less, other dimensions less than 24"
Above 110G
No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
--
--
--
Physical Protection
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
No Requirement
No Requirement
Not Applicable
Any Suitable Container
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
--

5310-00-442-3287 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5310-00-442-3287 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
N

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: