Premium Information is available for this item - Upgrade for $1 a day
5310-00-424-1982
Flat Washer
5310004241982 004241982 5017-5
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
7
Marketplace 5310-00-424-1982
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-424-1982 1+ Documents (More...)
-00-424-1982 Flat Washer 5310004241982 004241982,5017-5 RQST NE Updated Every Day 5310-00-424-1982 RQST
Updated Every Day 5310-00-424-1982 RQST NE Related Documents 5310-00-424-1982 1+ Documents ( More...
Restrictions 5310-00-424-1982
5310-00-424-1982 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-424-1982
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-424-1982
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-424-1982
- Part Number
- Manufacturer
- Status
- 5017-5
- Manufacturer
- 02121 - Goodrich Aerospace Canada Ltd (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-424-1982
- Characteristic
- Specifications
- Center Hole Shape Style [ABMX]
- Specifications
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.896 Inches Minimum And 0.916 Inches Maximum
- Material [MATT]
- Plastic Polytetrafluoroethylene Overall
- Material Document And Classification [MDCL]
- Ams 3651 Assn Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.615 Inches Minimum And 1.635 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.047 Inches Minimum And 0.053 Inches Maximum
Similar Supply Items to 5310-00-424-1982
Freight Information 5310-00-424-1982
5310-00-424-1982 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-424-1982 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-424-1982 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 772 for ocean manifesting and military sealift. 5310-00-424-1982 is not classified as a special type of cargo when transported by water. 5310-00-424-1982 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-424-1982
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --