Premium Information is available for this item - Upgrade for $1 a day
5310-00-419-0735
Hexagon Plain Nut
5310004190735 004190735 FF-N-836 7-660-200230 1205-85 340 2700 MS35691-1026
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
November 2023
16
Marketplace 5310-00-419-0735
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-00-419-0735 5+ Documents (More...)
FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,HEXAGON 247 EA NS Request Quotation
FFN836 NUT,PLAIN,HEXAGON 3 EA NS Request Quotation FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 35 EA NS Request Quotation FF-N836 NUT,PLAIN,SLOTTED,HEXAGON 226 EA
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,SLOTTED,HEXAGON 247
NUT,PLAIN,HEXAGON 35 EA NS Request Quotation Subscribe FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 35 EA NS Request Quotation FF-N836 NUT,PLAIN,SLOTTED,HEXAGON 226
FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,HEXAGON 247 EA NS Request Quotation
FFN836 NUT,PLAIN,HEXAGON 3 EA NS Request Quotation FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation
Restrictions 5310-00-419-0735
5310-00-419-0735 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-419-0735
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-419-0735
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBF
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTJBHD
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1998
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-00-419-0735
- Part Number
- Manufacturer
- Status
- MS35691-1026
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- FF-N-836
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 7-660-200230
- 12361 - Grove U.S. Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 1205-85
- 81495 - Koehring Cranes, Inc (Active)
- Advisory Reference
- Advisory Reference
- 340 2700
- 81495 - Koehring Cranes, Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-419-0735
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Bearing Surface Type [CRTM]
- Chamfered Or Washer Faced
- Hardness Rating [CQFM]
- 2.0 Rockwell B Minimum And 69.0 Rockwell B Maximum
- Material [MATT]
- Steel Overall
- Nominal Thread Size [CQJX]
- 0.625 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 4 Style And B Grade
- Nut Height [ADEA]
- 0.363 Inches Minimum And 0.387 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Width Across Flats [ASDB]
- 0.922 Inches Minimum And 0.937 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Mil-P-16232,Ty Z,Cl 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Phosphate Zinc Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 18
- Thread Series [BZRR]
- Unf
Weapon Systems (WSDC) 5310-00-419-0735
DLA Procurement Analysis 5310-00-419-0735
- Last Stock Position:
- 820 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-419-0735
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-00-419-0735
Freight Information 5310-00-419-0735
5310-00-419-0735 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-419-0735 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-419-0735 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-419-0735 is not classified as a special type of cargo when transported by water. 5310-00-419-0735 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-419-0735
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-419-0735 1 Records
Contracting Technical Data File (CTDF) 5310-00-419-0735 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: