Premium Information is available for this item - Upgrade for $1 a day
5310-00-410-3018
Hexagon Plain Nut
5310004103018 004103018 FF-N-836 836000-00 MS35649-2255S
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
November 2023
10
Marketplace 5310-00-410-3018
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-410-3018 5+ Documents (More...)
FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,HEXAGON 247 EA NS Request Quotation
FFN836 NUT,PLAIN,HEXAGON 3 EA NS Request Quotation FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 35 EA NS Request Quotation FF-N836 NUT,PLAIN,SLOTTED,HEXAGON 226 EA
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,SLOTTED,HEXAGON 247
NUT,PLAIN,HEXAGON 35 EA NS Request Quotation Subscribe FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request
FF-N-836 NUT,PLAIN,SLOTTED,HEXAGON 35 EA NS Request Quotation FF-N836 NUT,PLAIN,SLOTTED,HEXAGON 226
,PLAIN,KNURLED 126 EA NS Request Quotation FF-N836 NUT,PLAIN,KNURLED 226 EA NS Request Quotation FF-N-836
NUT,PLAIN,HEXAGON 35 EA NS Request Quotation Subscribe FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request
FF-N-836 NUT,PLAIN,HEXAGON 1631 EA NS Request Quotation FFN836 NUT,PLAIN,HEXAGON 247 EA NS Request Quotation
FFN836 NUT,PLAIN,HEXAGON 3 EA NS Request Quotation FF-N-836 NUT,PLAIN,HEXAGON 1285 EA NS Request Quotation
Restrictions 5310-00-410-3018
5310-00-410-3018 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains Silver.
Import and Export 5310-00-410-3018
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-410-3018
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTHD
- MOE Rule:
- X002
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-410-3018
- Part Number
- Manufacturer
- Status
- MS35649-2255S
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- FF-N-836
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 836000-00
- 32345 - Defense Reduction Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS35649-2255S
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-410-3018
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Bearing Surface Type [CRTM]
- Chamfered
- Material Document And Classification [MDCL]
- Qq-B-637 Alloy 462 Fed Spec 1St Material Response Overall Or Qq-B-637 Alloy 464 Fed Spec 2Nd Material Response Overall Or Qq-B-626 Comp 21 Fed Spec 3Rd Material Response Overall
- Material [MATT]
- Copper Alloy 462 Overall Or Copper Alloy 464 Overall Or Copper Alloy 377 Overall
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 13 Style
- Nut Height [ADEA]
- 0.178 Inches Minimum And 0.193 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Width Across Flats [ASDB]
- 0.423 Inches Minimum And 0.437 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-S-365 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Silver Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Series [BZRR]
- Unc
Weapon Systems (WSDC) 5310-00-410-3018
DLA Procurement Analysis 5310-00-410-3018
- Last Stock Position:
- 1604 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-410-3018
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-00-410-3018
Freight Information 5310-00-410-3018
5310-00-410-3018 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093460. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS NOI BBC/ZINC. 5310-00-410-3018 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48930 which rates the freight between FCL and LCL. 5310-00-410-3018 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-410-3018 is not classified as a special type of cargo when transported by water. 5310-00-410-3018 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-410-3018
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-410-3018 3 Records
Contracting Technical Data File (CTDF) 5310-00-410-3018 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: