Premium Information is available for this item - Upgrade for $1 a day
5310-00-363-3501
Flat Washer
5310003633501 003633501 810492 5A7556 5193866 383494 142761H 127250
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
22
Marketplace 5310-00-363-3501
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-363-3501 5+ Documents (More...)
Every Day 810492 RQST NE Updated Every Day 142761H RQST NE Updated Every Day 5310-00-363-3501 RQST NE
NSN 5310-00-363-3501 (Identification Every Day 810492 RQST NE Updated Every Day 142761H RQST NE Updated
-53/fsc-5315/uk 5315-99-528-3410 Headless Straight Pin 5315995283410995283410 SSN07M140-96-2-7926-383494
Every Day 5315-99-528-3410 RQST NE Restrictions https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-363-3501
RQST NE Updated Every Day 5920-21-921-0166 RQST https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-363-3501
Flat Washer 5310003633501 003633501,810492 9624Clutch Pressu Plate2520004229624 004229624 5193866
- Upgrade for $1 a day Upgrade your Account Upgrade 5330-00-942-2172Gasket5330009422172 009422172 127250
Plain Stud 5307995424215995424215 KC127250-1 127250 Part NumberManufacturerStatusKC127250-1 95311 -
RQST NE Updated Every Day 2520-00-422-9624 RQST https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-363-3501
Flat Washer 5310003633501 003633501,810492 day Upgrade your Account Upgrade 5310-00-363-3501Flat
Restrictions 5310-00-363-3501
5310-00-363-3501 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-363-3501
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-363-3501
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-00-363-3501
- Part Number
- Manufacturer
- Status
- 810492
- Manufacturer
- 1LW55 - Borgwarner Pds (Anderson), L.L.C. (Active)
- Primary Buy
- Primary Buy
- 5A7556
- 95201 - Napco International Llc (Active)
- Primary Buy
- Primary Buy
- 5193866
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 810492
- 24617 - General Motors Corp (Active)
- Primary Buy
- Primary Buy
- 383494
- 65282 - White Motor Corp (Obsolete)
- Original Design
- Original Design
- 142761H
- 31007 - Navistar International Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 127250
- 76894 - Celtrac Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 810492
- 16764 - General Motors Corp Delco Remy Div (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-363-3501
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Comp 1010 Overall
- Material Document And Classification [MDCL]
- Qq-S-633 Canc Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.328 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.688 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.062 Inches Nominal
Similar Supply Items to 5310-00-363-3501
Freight Information 5310-00-363-3501
5310-00-363-3501 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-363-3501 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-363-3501 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-363-3501 is not classified as a special type of cargo when transported by water. 5310-00-363-3501 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.