Premium Information is available for this item - Upgrade for $1 a day
5310-00-264-0621
Flat Washer
5310002640621 002640621 FFW92TYPEAGRADE2CLASSE E3096PC3155 E3213-2PC3155 3155
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
23
Marketplace 5310-00-264-0621
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-264-0621 5+ Documents (More...)
$1 a day Upgrade your Account Upgrade 5310-00-274-7840Flat Washer5310002747840 002747840 FFW92TYPEAGRADE2CLASSE
$1 a day Upgrade your Account Upgrade 5310-00-205-9931Flat Washer5310002059931 002059931 FFW92TYPEAGRADE2CLASSE
FFW92TYPEAGRADE2CLASSE WASHER,FLAT 12 EA NS Request Quotation Subscribe to View Vendor Details... 5310005829838
$1 a day Upgrade your Account Upgrade 5310-00-582-5598Flat Washer5310005825598 005825598 FFW92TYPEAGRADE2CLASSE
$1 a day Upgrade your Account Upgrade 5310-00-582-5598Flat Washer5310005825598 005825598 FFW92TYPEAGRADE2CLASSE
$1 a day Upgrade your Account Upgrade 5310-00-274-7840Flat Washer5310002747840 002747840 FFW92TYPEAGRADE2CLASSE
$1 a day Upgrade your Account Upgrade 5310-00-205-9931Flat Washer5310002059931 002059931 FFW92TYPEAGRADE2CLASSE
$1 a day Upgrade your Account Upgrade 5310-00-205-9345Flat Washer5310002059345 002059345 FFW92TYPEAGRADE2CLASSE
Flat Washer 5310002640621 002640621 5310-00-264-0621 5310002640621 002640621 is a washer having
Restrictions 5310-00-264-0621
5310-00-264-0621 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-264-0621
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-264-0621
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTKEHD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5310-00-264-0621
- Part Number
- Manufacturer
- Status
- E3096PC3155
- Manufacturer
- 33667 - King Engineering Corporation (Active)
- Primary Buy
- Primary Buy
- E3213-2PC3155
- 33667 - King Engineering Corporation (Active)
- Primary Buy
- Primary Buy
- 3155
- 33667 - King Engineering Corporation (Active)
- Primary Buy
- Primary Buy
- FFW92TYPEAGRADE2CLASSE
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 3155
- 3EM17 - Iso Group Inc (Active)
- Secondary Buy
- Secondary Buy
- 3155
- 85446 - Bokers Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5310-00-264-0621
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Departure From Cited Designator [ZZZX]
- As Modified By Thk
- Hole Diameter [AAUB]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-B-613 Fed Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy 11 Overall
- Nondefinitive Spec/Std Data [ZZZT]
- A Type And 2 Grade And E Class
- Overall Diameter [ADAV]
- 0.500 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.03125 Inches Nominal
Weapon Systems (WSDC) 5310-00-264-0621
DLA Procurement Analysis 5310-00-264-0621
- Last Stock Position:
- 22900 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-264-0621
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-264-0621
Freight Information 5310-00-264-0621
5310-00-264-0621 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-264-0621 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-264-0621 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-264-0621 is not classified as a special type of cargo when transported by water. 5310-00-264-0621 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-264-0621
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-264-0621 1 Records
Contracting Technical Data File (CTDF) 5310-00-264-0621 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: