Premium Information is available for this item - Upgrade for $1 a day
5310-00-262-4989
Hexagon Plain Nut
5310002624989 002624989 MIL-DTL-1222J TYPE 1 MIL-S-1222, TYP E 1 293632PC6 MIL-S-1222 TYPE1 MILB857TYPEA
A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) View more Hexagon Plain Nut
May 2023
10
Marketplace 5310-00-262-4989
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-262-4989 5+ Documents (More...)
002624989 MIL-DTL-1222J TYPE 1 MIL-S-1222 , TYP E 1 293632PC6 MIL-S-1222 TYPE1 MILB857TYPEA A nut, flat
Plain Nut 5310001895183 001895183 MILB857TYPEA NUT,PLAIN,HEXAGON 75 PG NS Request Quotation Updated
GRADE 8 MIL-S-1222 An externally threaded fastener designed for insertion LG, STL MIL-DTL-1222J TYPE 1
GRADE 8 MIL-S-1222 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-262-4989 Hexagon Plain
Hexagon Plain Nut 5310002624989 002624989 your Account Upgrade 5310-00-262-4989Hexagon Plain Nut5310002624989
002624989 MIL-DTL-1222J TYPE 1 MIL-S-1222 , TYP E 1 293632PC6 MIL-S-1222 TYPE1 MILB857TYPEA A nut, flat
002624989 MIL-DTL-1222J TYPE 1 MIL-S-1222 , TYP E 1 293632PC6 MIL-S-1222 TYPE1 MILB857TYPEA A nut, flat
fsg-53/fsc-5310/us 5310-00-596-7920 Hexagon Plain Nut 5310005967920 005967920 87755-9 MIL-S-1222 MILB857TYPEA
GRADE 8 MIL-S-1222 An externally threaded fastener designed for insertion LG, STL MIL-DTL-1222J TYPE 1
GRADE 8 MIL-S-1222 https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-262-4989 Hexagon Plain
Restrictions 5310-00-262-4989
5310-00-262-4989 is a Hexagon Plain Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-262-4989
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-262-4989
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTJBHD
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-262-4989
- Part Number
- Manufacturer
- Status
- 293632PC6
- Manufacturer
- 10001 - Navair And Navsea Managed (Active)
- Primary Buy
- Primary Buy
- MIL-DTL-1222J TYPE 1
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-S-1222 TYPE1
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILB857TYPEA
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-S-1222, TYP E 1
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5310-00-262-4989
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Bearing Surface Type [CRTM]
- Chamfered Or Washer Faced
- Material Document And Classification [MDCL]
- Qq-S-763,Cond A Fed Spec 1St Material Response Overall Or Qq-S-763,Cond C Fed Spec 1St Material Response Overall Or Astm A582,Cond A Assn Std 2Nd Material Response Overall Or Astm A582,Cond C Assn Std 2Nd Material Response Overall Or Qq-S-763,Cond A Fed Spec 3Rd Material Response Overall Or Qq-S-763,Cond C Fed Spec 3Rd Material Response Overall
- Material [MATT]
- Steel Comp 302 Overall Or Steel Comp 303 Overall Or Steel Comp 304 Overall
- Nominal Thread Size [CQJX]
- 0.750 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 1 Type
- Nut Height [ADEA]
- 0.617 Inches Minimum And 0.665 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Part Name Assigned By Controlling Agency [CXCY]
- Slotted Hex Nut
- Special Features [FEAT]
- Two 0.188 In. Dia Holes Spaced 0.30 In. From Washer Faced End 180 Deg. Apart On Flats
- Width Across Flats [ASDB]
- 1.088 Inches Minimum And 1.125 Inches Maximum
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 10
- Thread Series [BZRR]
- Unc
DLA Procurement Analysis 5310-00-262-4989
Management Data 5310-00-262-4989
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-262-4989
Freight Information 5310-00-262-4989
5310-00-262-4989 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-00-262-4989 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-00-262-4989 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-262-4989 is not classified as a special type of cargo when transported by water. 5310-00-262-4989 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-262-4989
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-262-4989 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: