Premium Information is available for this item - Upgrade for $1 a day
5310-00-252-2471
Flat Washer
5310002522471 002522471 152425PC13
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
5
Marketplace 5310-00-252-2471
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-252-2471 3+ Documents (More...)
5310-00-252-2471 RQST Updated Every Day 5310-00-252-2471 RQST NE Related Documents 5310-00-252-2471
(Identification) 1/3 NSN 5310-00-252-2471 (Identification) 2/3 NSN 5310-00-252-2471 (Identification 5310
Flat Washer 5310002522471 002522471 (Identification) 1/3 NSN 5310-00-252-2471 (Identification)
2/3 NSN 5310-00-252-2471 (Identification) -00-252-2471 RQST NE Restrictions 5310-00-252-2471 DEMIL https
Restrictions 5310-00-252-2471
5310-00-252-2471 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-252-2471
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-252-2471
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-00-252-2471
- Part Number
- Manufacturer
- Status
- 152425PC13
- Manufacturer
- 10001 - Navair And Navsea Managed Original (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-252-2471
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.375 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-C-576 Fed Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy Overall
- Overall Diameter [ADAV]
- 0.745 Inches Minimum And 0.750 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.060 Inches Nominal
Similar Supply Items to 5310-00-252-2471
Freight Information 5310-00-252-2471
5310-00-252-2471 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-252-2471 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-252-2471 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-252-2471 is not classified as a special type of cargo when transported by water. 5310-00-252-2471 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-252-2471
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement