Premium Information is available for this item - Upgrade for $1 a day
5310-00-246-8772
Flat Washer
5310002468772 002468772 AN902-3 61H492-3
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
12
Marketplace 5310-00-246-8772
Request a Quotation from participating marketplace vendors
Restrictions 5310-00-246-8772
5310-00-246-8772 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-246-8772
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-246-8772
- Spain (YB01)
- Effective Date:
- 1 Sep 2008
Approved Sources 5310-00-246-8772
- Part Number
- Manufacturer
- Status
- 61H492-3
- Manufacturer
- 79500 - Westinghouse Electric Corp (Active)
- Primary Buy
- Primary Buy
- AN902-3
- 88044 - Aeronautical Standards Group (Active)
- Incomplete Standard
- Incomplete Standard
- 61H492-3
- 48521 - Colt Industries Operating Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-246-8772
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Departure From Cited Document [ZZZW]
- As Modified By The Material
- Hardness Rating [CQFM]
- 55.0 Shore Durometer A Minimum And 65.0 Shore Durometer A Maximum
- Hole Diameter [AAUB]
- 0.294 Inches Minimum And 0.309 Inches Maximum
- Material [MATT]
- Rubber Synthetic Overall
- Overall Diameter [ADAV]
- 0.441 Inches Nominal
- Minimum Tensile Strength [CQBC]
- 1700 Pounds Per Square Inch
- Material Document And Classification [MDCL]
- Ams 3212 Assn Std Single Material Response Overall
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.061 Inches Minimum And 0.076 Inches Maximum
NATO Stock Numbers Related to 5310-00-246-8772
Freight Information 5310-00-246-8772
5310-00-246-8772 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-246-8772 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-246-8772 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-246-8772 is not classified as a special type of cargo when transported by water. 5310-00-246-8772 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.