Premium Information is available for this item - Upgrade for $1 a day
5310-00-246-5544
Flat Washer
5310002465544 002465544 R927 214174 17-60B3 2-436 WAB214174
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
39
Marketplace 5310-00-246-5544
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-246-5544 5+ Documents (More...)
Restrictions 5310-00-246-5544
5310-00-246-5544 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-246-5544
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-246-5544
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-246-5544
- Part Number
- Manufacturer
- Status
- R927
- Manufacturer
- 66155 - Porta Drill Inc (Active)
- Primary Buy
- Primary Buy
- 214174
- 06853 - Bendix Commercial Vehicle Systems (Active)
- Primary Buy
- Primary Buy
- 17-60B3
- 60528 - Trailmobile Inc (Active)
- Primary Buy
- Primary Buy
- 214174
- 1DF03 - Abm Equipment, Llc (Active)
- Primary Buy
- Primary Buy
- 2-436
- 31245 - Terex Usa Llc (Active)
- Primary Buy
- Primary Buy
- 214174
- 04627 - Hyster-Yale Group, Inc. (Active)
- Primary Buy
- Primary Buy
- 214174
- 78550 - Timpte Inc (Obsolete)
- Original Design
- Original Design
- 214174
- 30076 - Hyster-Yale Group, Inc. (Active)
- Secondary Buy
- Secondary Buy
- R927
- 51501 - Rogers Brothers Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 79419 - Watson H S Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 37159 - Lufkin Industries, Inc. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 96606 - American Coleman Company, The (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 29885 - Hyde Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 56721 - Premier Central Truck Body (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 73830 - Gerstenlager Co The (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 214174
- 23705 - Fruehauf Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- WAB214174
- 23705 - Fruehauf Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-246-5544
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 75.0 Shore Durometer A Minimum And 85.0 Shore Durometer A Maximum
- Hole Diameter [AAUB]
- 0.891 Inches Nominal
- Material [MATT]
- Rubber Synthetic Overall
- Minimum Tensile Strength [CQBC]
- 1500 Pounds Per Square Inch
- Material Document And Classification [MDCL]
- 417,Gr Sc815e3f1 Mil Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.250 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.219 Inches Nominal
NATO Stock Numbers Related to 5310-00-246-5544
Freight Information 5310-00-246-5544
5310-00-246-5544 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-246-5544 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-246-5544 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-246-5544 is not classified as a special type of cargo when transported by water. 5310-00-246-5544 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-246-5544
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- --
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Special requirement – See specific instructions or drawings provided