Premium Information is available for this item - Upgrade for $1 a day
5310-00-205-9908
Flat Washer
5310002059908 002059908 00551
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
6
Marketplace 5310-00-205-9908
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-205-9908 5+ Documents (More...)
Flat Washer 5310002059908 002059908,00551 00551 A washer having a centrally located hole with a solid
/3 NSN 5310-00-205-9908 (Identification United States (US) 4. 5310-00-205-9908 Marketplace Restrictions
/000 698/GA/00551/000 Managed by United Kingdom NSN Created on 6 Jan 1995 Data Last Changed January 2023
/000698/GA/00551/000 Managed by United Kingdom NSN Created on 6 Jan 1995 Data Last Changed January 2023
591730 NumberManufacturerStatusSU591730-00551 S9621 - https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310
-00-205-9908 Flat Washer 5310002059908 002059908,00551 Created on 6 Jan 1995 Data Last Changed January
3511-013-00551 An active semiconductor device with three or more electrodes.
Flat Washer 5310002059908 002059908,00551 8490 Part NumberManufacturerStatusE03-00551 https https
(241)A7904E03-00551 An item whose principal purpose is to produce light from a glowing filament RQST
An item whose principal purpose is to produce light from a glowing filament(s). (241)A7904E03-00551
Restrictions 5310-00-205-9908
5310-00-205-9908 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-205-9908
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-205-9908
- National Security Agency (DGX1)
- Effective Date:
- 1 Jan 2014
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HDKEHX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-205-9908
- Part Number
- Manufacturer
- Status
- 00551
- Manufacturer
- 14153 - Defense Logistics Agency (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-205-9908
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 28.0 Rockwell C Minimum And 32.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 0.646 Inches Minimum And 0.666 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-624 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 8640H Overall
- Overall Diameter [ADAV]
- 1.365 Inches Minimum And 1.385 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Finish [CSYM]
- 32.0 Microinches Bottom
- Surface Finish [CSYM]
- 32.0 Microinches Top
- Surface Finish [CSYM]
- 63.0 Microinches Inner
- Surface Finish [CSYM]
- 63.0 Microinches Outer
- Thickness [ABNM]
- 0.245 Inches Minimum And 0.255 Inches Maximum
DLA Procurement Analysis 5310-00-205-9908
Management Data 5310-00-205-9908
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5310-00-205-9908
Freight Information 5310-00-205-9908
5310-00-205-9908 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-205-9908 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-205-9908 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-205-9908 is not classified as a special type of cargo when transported by water. 5310-00-205-9908 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-205-9908
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-205-9908 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: