Premium Information is available for this item - Upgrade for $1 a day
5310-00-205-8941
Flat Washer
5310002058941 002058941 A2075 10956466
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
19
Marketplace 5310-00-205-8941
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-205-8941 5+ Documents (More...)
A2075 FIXTURE,AIRCRAFT MAINTENANCE 2 EA NS Request Quotation Updated Every Day 4920-00-125-6435 RQST
Flat Washer 5310002058941 002058941,A2075 Upgrade for $1 a day Upgrade your Account Upgrade 5310
What is CAGE Code A2075?
, Italy.Where is CAGE Code A2075 Located?
) Supply Items Approved for CAGE A2075 Page 1 of 1 7110-15-184-8288 Tavolo NSN711015R578370RNCC: 3 |
184-8288 Italy (ZR) Approved Sources 7110-15-184-8288 Part NumberManufacturerStatusNSN711015R578370 A2075
7460151319637 151319637 5 8 Oct 1996 7460-15-131-9637 https//www.nsnlookup.com /cage Lips Vago Spa (CAGE Code A2075
7597 Italy (ZR) Approved Sources 7125-15-122-7597 Part NumberManufacturerStatusSCAFFALATURAINFERRO A2075
) A2075 Page 1 of 1 7110-15-184-8288 Tavolo NSN711015R578370RNCC: 3 | RNVC: 2 | DAC: 1 30 Dec 2008 7460
Users 7460-15-131-9635 Italy (ZR) Approved Sources 7460-15-131-9635 Part NumberManufacturerStatus1067 A2075
Restrictions 5310-00-205-8941
5310-00-205-8941 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-205-8941
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-205-8941
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Mar 1998
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-205-8941
- Part Number
- Manufacturer
- Status
- A2075
- Manufacturer
- 0PN68 - Ampex Data Systems Corporation (Active)
- Incomplete Reference
- Incomplete Reference
- A2075
- 92739 - Ampex Systems Corp (Replaced)
- Original Design
- Original Design
- 10956466
- 19207 - U S Army Tank Automotive Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-205-8941
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Steel Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec Single Treatment Response Overall
- Hole Diameter [AAUB]
- 0.203 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 1.000 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.047 Inches Nominal
DLA Procurement Analysis 5310-00-205-8941
Management Data 5310-00-205-8941
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-00-205-8941
Freight Information 5310-00-205-8941
5310-00-205-8941 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-205-8941 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-205-8941 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-205-8941 is not classified as a special type of cargo when transported by water. 5310-00-205-8941 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-205-8941
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-205-8941 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: