5310-00-199-6017

Flat Washer

5310001996017 001996017 PC451S42-049PC45 DE129S4200-241265PC146 PC461S42-02PC236 DE129S4200-241248PCN69 PC451S42-036PC70 AM136S42-147PC53 PC578S42-248PC236 PC461S42-29PC236 PC461S42-065PCN69 AM351S4200-581157PC53 AM82S42-177PC70 AM82S42-227PCN69 PC461S42-89PCN69 PC461S42-275PC236 PC461S42-201PC236 PC461S42-264PCN69 AM136S42-154PC53 AM82S42-353PC70 D2-8972PC70 D2-9420PC146 D2-9701PC53 D2-9713PC53 HC10117SPCN69 N69 HC6164SPCN69

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer