Premium Information is available for this item - Upgrade for $1 a day
5310-00-197-8822
Flat Washer
5310001978822 001978822 FF-W-92B 12EHW20 1785275 FC18788 5186743 185482 F18788 FC3911 FC3911C 18788 27327 V4587X
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
47
Marketplace 5310-00-197-8822
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-197-8822 5+ Documents (More...)
/fsg-53/fsc-5310/us 5310-00-094-3004 Flat Washer 5310000943004 000943004,FF-W-92B FF-W-92B WASHER,FLAT
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-00-558-9046 Flat Washer 5310005589046 005589046,FF-W-92B FF-W-92B WASHER,FLAT
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-00-270-2106 Flat Washer 5310002702106 002702106,FF-W-92B FF-W-92B WASHER,FLAT
/fsg-53/fsc-5310/us 5310-00-558-9046 Flat Washer 5310005589046 005589046,FF-W-92B FF-W-92B WASHER,FLAT
FF-W-92B WASHER,FLAT RQST NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5310-00-197-8822
5310-00-197-8822 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-197-8822
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-197-8822
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTKE
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-197-8822
- Part Number
- Manufacturer
- Status
- 1785275
- Manufacturer
- 24617 - General Motors Corp (Active)
- Original Design
- Original Design
- FF-W-92B
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 12EHW20
- 76040 - Mack Trucks Inc (Active)
- Secondary Buy
- Secondary Buy
- 1785275
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- FC18788
- 63477 - Federal Mogul Corp (Active)
- Secondary Buy
- Secondary Buy
- 5186743
- 19207 - U S Army Tank Automotive Command (Active)
- Secondary Buy
- Secondary Buy
- 185482
- 58275 - Sasco Inc Canadian Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- F18788
- 63477 - Federal Mogul Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- FC3911
- 63477 - Federal Mogul Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- FC3911C
- 63477 - Federal Mogul Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 18788
- 63477 - Federal Mogul Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 12EHW20
- 76083 - Mack Trucks, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 27327
- 56442 - Diamond Reo Truck Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- V4587X
- 65282 - White Motor Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-197-8822
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 35.0 Rockwell B Nominal
- Hole Diameter [AAUB]
- 0.265 Inches Minimum And 0.270 Inches Maximum
- Material Document And Classification [MDCL]
- Sae Assn Std Single Material Response Overall
- Material [MATT]
- Steel Comp 1010 Overall
- Overall Diameter [ADAV]
- 0.802 Inches Minimum And 0.822 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Surface Treatment Document And Classification [STDC]
- P-232 Fscm 63477 Mfr Ref Single Treatment Response Overall
- Surface Treatment [SFTT]
- Chromate Overall
- Thickness [ABNM]
- 0.062 Inches Minimum And 0.068 Inches Maximum
DLA Procurement Analysis 5310-00-197-8822
Management Data 5310-00-197-8822
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-197-8822
Freight Information 5310-00-197-8822
5310-00-197-8822 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-197-8822 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-197-8822 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-197-8822 is not classified as a special type of cargo when transported by water. 5310-00-197-8822 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-197-8822
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-197-8822 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: