Premium Information is available for this item - Upgrade for $1 a day
5310-00-167-0779
Flat Washer
5310001670779 001670779 AN960A516 2768-1177P1
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
16
Marketplace 5310-00-167-0779
Request a Quotation from participating marketplace vendors
Restrictions 5310-00-167-0779
5310-00-167-0779 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item has been determined to be hazardous and information is contained in the Hazardous Materials Information Resource System (HMIRS). The precious metals content of this item is unknown.
Import and Export 5310-00-167-0779
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-167-0779
- Brazil (YA01)
- Effective Date:
- 1 Jan 2011
Approved Sources 5310-00-167-0779
- Part Number
- Manufacturer
- Status
- AN960A516
- Manufacturer
- 88044 - Aeronautical Standards Group (Active)
- Definitive Standard
- Definitive Standard
- 2768-1177P1
- 3B150 - Raytheon Company (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 2768-1177P1
- 49956 - Raytheon Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-167-0779
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.328 Inches Nominal
- Material [MATT]
- Aluminum Alloy Overall
- Overall Diameter [ADAV]
- 0.557 Inches Minimum And 0.582 Inches Maximum
- Heat Treatment [HEAT]
- F-As Fabricated
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.070 Inches Nominal
NATO Stock Numbers Related to 5310-00-167-0779
Freight Information 5310-00-167-0779
5310-00-167-0779 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-167-0779 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5310-00-167-0779 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-167-0779 is not classified as a special type of cargo when transported by water. 5310-00-167-0779 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.