Premium Information is available for this item - Upgrade for $1 a day
5310-00-141-1723
Flat Washer
5310001411723 001411723 62404 K62404
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
8
Marketplace 5310-00-141-1723
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-141-1723 5+ Documents (More...)
WASHER,FLAT 5 EA NS Request Quotation Updated Every Day 62404 RQST NE Updated Every Day K62404 RQST
/fsg-53/fsc-5310/us 5310-00-141-1723 Flat Washer 5310001411723 001411723,62404 62404K62404 A washer
-001/005 PIECE 37 62404-048 62404-005 PIECE 37 A grouping of two or more -305 62400-002 62404-00262404
-005 PIECE -005 PIECE 37 A grouping of two or more -305 62400-002 62404-002 62404 -001/005 PIECE 37 62404
-370 815-1853206PIECE37 62404-001/005 PIECE 37 62404-048 62404-005 PIECE 37 A grouping of two or more
Flat Washer 5310001411723 001411723,62404 62404-04862404-005 PIECE 37 A grouping of two or more
or more -370 815-1853206PIECE37 62404-001/005 PIECE 37 62404-048 62404-005 PIECE 37 A grouping of two
of two or more -305 62400-002 62404-002 62404 -001/005 PIECE 37 62404-048 62404 https//www.nsnlookup.com
-001/005 PIECE 37 62404-048 62404-005 PIECE 37 A grouping of two or more -148 62400-022 62404-005 PIECE
-005 PIECE 37 A grouping of two or more -305 62400-002 62404-002 62404 -001/005 PIECE 37 62404-048 62404
Restrictions 5310-00-141-1723
5310-00-141-1723 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-141-1723
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-141-1723
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 1999
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5310-00-141-1723
- Part Number
- Manufacturer
- Status
- 62404
- Manufacturer
- 15434 - Cummins Inc. (Active)
- Original Design
- Original Design
- K62404
- 15434 - Cummins Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-141-1723
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 14.0 Shore Scleroscope Minimum And 16.0 Shore Scleroscope Maximum
- Hole Diameter [AAUB]
- 0.6175 Inches Minimum And 0.6185 Inches Maximum
- Material [MATT]
- Nickel Alloy Overall
- Overall Diameter [ADAV]
- 1.1240 Inches Minimum And 1.1250 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.0139 Inches Minimum And 0.0179 Inches Maximum
Weapon Systems (WSDC) 5310-00-141-1723
DLA Procurement Analysis 5310-00-141-1723
Management Data 5310-00-141-1723
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-141-1723
Freight Information 5310-00-141-1723
5310-00-141-1723 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-141-1723 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-141-1723 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-141-1723 is not classified as a special type of cargo when transported by water. 5310-00-141-1723 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-141-1723
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-141-1723 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: