Premium Information is available for this item - Upgrade for $1 a day
5310-00-134-4087
Flat Washer
5310001344087 001344087 0550153-1
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
12
Marketplace 5310-00-134-4087
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-134-4087 5+ Documents (More...)
RQST NE Updated Every Day 5310-00-134-4087 RQST Updated Every Day 5310-00-134-4087 RQST NE Related Documents
5310-00-134-4087 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-134-4087
ADPEC : 5310-21-806-1361 is a Flat Washer NATO https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-134-4087
Flat Washer 5310001344087 001344087,0550153-1 Restrictions Approved Sources Datasheet Management
Flat Washer 5310001344087 001344087,0550153-1 Upgrade for $1 a day Upgrade your Account Upgrade
5310-00-134-4087Flat Washer5310001344087 001344087 0550153 www.nsnlookup.com /fsg-53/fsc-5310/us 5310
Flat Washer 5310001344087 001344087,0550153-1 Upgrade for $1 a day Upgrade your Account Upgrade
5310-00-134-4087Flat Washer5310001344087 001344087 0550153 NumberManufacturerStatus0550153-1 7EK50 -
Flat Washer 5310001344087 001344087,0550153-1 Upgrade for $1 a day Upgrade your Account Upgrade
5310-00-134-4087Flat Washer5310001344087 001344087 0550153 NumberManufacturerStatus0550153-1 7EK50 -
Restrictions 5310-00-134-4087
5310-00-134-4087 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-134-4087
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-134-4087
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Thailand (YY01)
- Effective Date:
- 1 Feb 2015
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Nov 2002
- Portugal (ZP)
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1997
- Greece (ZU)
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW)
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
- United States of America (ZZ)
Approved Sources 5310-00-134-4087
- Part Number
- Manufacturer
- Status
- 0550153-1
- Manufacturer
- 7EK50 - Textron Aviation Inc (Active)
- Primary Buy
- Primary Buy
- 0550153-1
- 71379 - Cessna Aircraft Company (Replaced)
- Original Design
- Original Design
Datasheet 5310-00-134-4087
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.375 Inches Nominal
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 1.000 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.109 Inches Nominal
DLA Procurement Analysis 5310-00-134-4087
Management Data 5310-00-134-4087
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-00-134-4087
Freight Information 5310-00-134-4087
5310-00-134-4087 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-134-4087 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-134-4087 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-134-4087 is not classified as a special type of cargo when transported by water. 5310-00-134-4087 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-134-4087 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: