Premium Information is available for this item - Upgrade for $1 a day
5310-00-134-3928
Flat Washer
5310001343928 001343928 FFW92A A1638-9
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
10
Marketplace 5310-00-134-3928
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-134-3928 5+ Documents (More...)
/fsg-53/fsc-5310/us 5310-00-134-3928 Flat Washer 5310001343928001343928,FFW92A FFW92AA1638-9 A washer
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-134-3928 Flat Washer 5310001343928001343928,FFW92A
https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-158-4585 Ring Spacer 5365001584585001584585,FFW92A
https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-00-158-4585 Ring Spacer 5365001584585001584585,FFW92A
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-191-8843 Flat Washer 5310001918843 001918843,FFW92A
(Active) Original Design RNCC 3 RNVC 9 MEDALS DAC 2 FFW92A 81348 - Federal Specifications Promulgated
(Active) Original Design RNCC 3 RNVC 9 MEDALS DAC 2 FFW92A 81348 - Federal Specifications Promulgated
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-134-3928 Flat Washer 5310001343928 001343928,FFW92A
Flat Washer 5310001343928 001343928,FFW92A (Active) Original Design RNCC 3 RNVC 9 MEDALS https
//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-00-209-2199 Flat Washer 5310002092199 002092199,FFW92A (
Restrictions 5310-00-134-3928
5310-00-134-3928 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-134-3928
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-134-3928
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Brazil (YA)
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Spain (YB)
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1998
- Philippines (ZM01)
- Effective Date:
- 1 Feb 2015
- Turkey (ZW)
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
- United States of America (ZZ)
Approved Sources 5310-00-134-3928
- Part Number
- Manufacturer
- Status
- A1638-9
- Manufacturer
- 76275 - Cessna Aircraft Co (Active)
- Primary Buy
- Primary Buy
- FFW92A
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-00-134-3928
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.196 Inches Minimum And 0.206 Inches Maximum
- Material [MATT]
- Copper Alloy Overall
- Overall Diameter [ADAV]
- 0.305 Inches Minimum And 0.315 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.060 Inches Minimum And 0.072 Inches Maximum
DLA Procurement Analysis 5310-00-134-3928
Management Data 5310-00-134-3928
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5310-00-134-3928
Freight Information 5310-00-134-3928
5310-00-134-3928 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-134-3928 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-134-3928 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-134-3928 is not classified as a special type of cargo when transported by water. 5310-00-134-3928 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-134-3928 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: