Premium Information is available for this item - Upgrade for $1 a day
5310-00-113-6236
Recessed Washer
5310001136236 001136236 151671
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED. View more Recessed Washer
May 2023
3
Marketplace 5310-00-113-6236
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-113-6236 5+ Documents (More...)
Restrictions 5310-00-113-6236
5310-00-113-6236 is a Recessed Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-113-6236
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-113-6236
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5310-00-113-6236
- Part Number
- Manufacturer
- Status
- 151671
- Manufacturer
- 23452 - Franklin Electric Co Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-113-6236
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Bottom Recess Angle [CRKG]
- 90.0 Degrees Nominal
- Bottom Recess Diameter [CSML]
- 2.068 Inches Minimum And 2.073 Inches Maximum
- Hardness Rating [CQFM]
- 30.0 Rockwell C Minimum And 33.0 Rockwell C Maximum
- Hole Diameter [AAUB]
- 2.006 Inches Minimum And 2.011 Inches Maximum
- Material Thickness [ABPX]
- 0.464 Inches Minimum And 0.474 Inches Maximum
- Material [MATT]
- Steel Overall
- Outside Diameter [ABKV]
- 2.990 Inches Minimum And 3.010 Inches Maximum
- Heat Treatment [HEAT]
- Cold Drawn Full Hard Condition
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Top Recess Angle [CRSD]
- 90.0 Degrees Nominal
- Top Recess Diameter [CQJW]
- 2.068 Inches Minimum And 2.073 Inches Maximum
- Style Designator [STYL]
- Recessed Both Sides
DLA Procurement Analysis 5310-00-113-6236
Management Data 5310-00-113-6236
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-113-6236
Freight Information 5310-00-113-6236
5310-00-113-6236 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-113-6236 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-113-6236 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-113-6236 is not classified as a special type of cargo when transported by water. 5310-00-113-6236 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-113-6236 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: