Premium Information is available for this item - Upgrade for $1 a day
5310-00-033-7066
Flat Washer
5310000337066 000337066 FF-W-92 BACW10P124S
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
23
Marketplace 5310-00-033-7066
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-033-7066 5+ Documents (More...)
(Identification) 1/3 NSN 5310-00-033-7066 (Identification) 2/3 NSN 5310-00-033-7066 (Identification
FF-W-92 WASHER,FLAT 34 EA NS Request Quotation Updated Every Day 5310-00-033-7066 RQST NE Updated Every
FFW92 NUCLEAR SAFC SIRPOD 824 EA NS Request Quotation FF-W-92 NUCLEAR SAFC SIRPOD 7971 EA NS Request
Flat Washer 5310000337066 000337066,FF-W-92 FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe
Flat Washer 5310000337066 000337066,FF-W-92 FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
FF-W-92 WASHER,FLAT 40 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-345-6557 Flat Washer 5310013456557 013456557,FF-W-92 FF-W-92 WASHER,FLAT
FF-W-92 WASHER,FLAT 34 HD NS Request Quotation Subscribe to View Vendor Details...
/fsg-53/fsc-5310/us 5310-01-301-1983 Flat Washer 5310013011983 013011983,FF-W-92 FF-W-92 WASHER,FLAT
Restrictions 5310-00-033-7066
5310-00-033-7066 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-033-7066
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-033-7066
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- GTKEHD
- Brazil (YA01)
- Effective Date:
- 1 Dec 1999
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Thailand (YY01)
- Effective Date:
- 1 Feb 2015
- New Zealand (ZE01)
- Effective Date:
- 1 May 2003
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5310-00-033-7066
- Part Number
- Manufacturer
- Status
- BACW10P124S
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- FF-W-92
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5310-00-033-7066
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hole Diameter [AAUB]
- 0.380 Inches Minimum And 0.400 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-636-Canceled Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Overall
- Overall Diameter [ADAV]
- 1.000 Inches Minimum And 1.030 Inches Maximum
- Peripheral Shape Style [ABMW]
- Round
- Specification/Standard Data [ZZZK]
- 81205-Bacw10p Manufacturers Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 1,Cl 1 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thickness [ABNM]
- 0.032 Inches Nominal
Weapon Systems (WSDC) 5310-00-033-7066
DLA Procurement Analysis 5310-00-033-7066
- Last Stock Position:
- 6993 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-033-7066
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-033-7066
Freight Information 5310-00-033-7066
5310-00-033-7066 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-00-033-7066 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-00-033-7066 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-033-7066 is not classified as a special type of cargo when transported by water. 5310-00-033-7066 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-033-7066
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-033-7066 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: