Premium Information is available for this item - Upgrade for $1 a day
5310-00-010-3347
Flat Washer
5310000103347 000103347 FFW92TYPEAGRADE1 60192H 29034 0911116-2 8630-36-18 70911116 911116 103347 5433 0911116
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by United States
NSN Created on 1 Jan 1963
Data Last Changed
November 2023
November 2023
NATO Update Count
33
33
NATO Data Quality
Marketplace 5310-00-010-3347
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-010-3347 5+ Documents (More...)
5310-00-543-5868 5310005435868 005435868 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-596-9410 5310005969410 005969410 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-639-0758 5310006390758 006390758 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-276-1195 5310002761195 002761195 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-00-297-9016 5310002979016 002979016 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5310-00-010-3347
5310-00-010-3347 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-010-3347
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5310-00-010-3347
- Part Number
- Manufacturer
- Status
- 60192H
- Manufacturer
- 04627 - Hyster-Yale Group, Inc. (Active)
- Primary Buy
- Primary Buy
- 29034
- 04627 - Hyster-Yale Group, Inc. (Active)
- Primary Buy
- Primary Buy
- 0911116-2
- 6N299 - Agco Corp (Active)
- Primary Buy
- Primary Buy
- 103347
- 0A335 - Linear Motion Llc (Active)
- Primary Buy
- Primary Buy
- FFW92TYPEAGRADE1
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 8630-36-18
- 98042 - Marinette Marine Corporation (Active)
- Secondary Buy
- Secondary Buy
- 70911116
- K5770 - H M Plant Limited (Active)
- Secondary Buy
- Secondary Buy
- 911116
- K5770 - H M Plant Limited (Active)
- Secondary Buy
- Secondary Buy
- 29034
- 30076 - Hyster-Yale Group, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 60192H
- 30076 - Hyster-Yale Group, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 911116
- 92392 - Allis-Chalmers Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 60192H
- 31007 - Navistar International Corporation (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 8630-36-18
- 08315 - Highway Products Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 103347
- 52788 - General Motors Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 103347
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5433
- 73460 - Eaton Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 0911116
- 92392 - Allis-Chalmers Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 103347
- 23705 - Fruehauf Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 103347
- 7X677 - General Motors Llc (Active)
- Advisory Reference
- Advisory Reference
NATO Stock Numbers Related to 5310-00-010-3347
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100