5310-99-981-6544
Flat Washer
5310999816544 999816544 BS EN ISO7089 ISO7089-14-200HV-A3L NE2003563
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by United Kingdom
NSN Created on 1 Sep 2009
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5310-99-981-6544
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-981-6544 5+ Documents (More...)
valve, graphite impregnated and lubricated items. https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99-981-6544
Flat Washer 5310999816544 999816544 5310-99-981-6544 5310999816544 999816544 is a washer having
Flat Washer 5310999816544 999816544 5310-99-981-6544 5310999816544 999816544 is a washer having
5310-99-997-3854 5310999973854 999973854 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-99-666-8387 5310996668387 996668387 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
web browser . 5310-99-601-9285Flat Washer5310996019285 996019285 ISO7089-20-200HV-A3D NE2005606 BS EN ISO7089
RNCC 2 RNVC 2 DAC 4 NE2005606 K0407 - Rbsl Washington (Active) Secondary Buy RNCC 5 RNVC 2 DAC 2 BS EN ISO7089
RNCC 2 RNVC 2 DAC 4 NE2005606 K0407 - Rbsl Washington (Active) Secondary Buy RNCC 5 RNVC 2 DAC 2 BS EN ISO7089
5310-99-968-4987 5310999684987 999684987 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5310-99-981-6544
End Users 5310-99-981-6544
- France (ZF)
- United Kingdom (ZK)
Approved Sources 5310-99-981-6544
- Part Number
- Manufacturer
- Status
- ISO7089-14-200HV-A3L
- Manufacturer
- I9008 - International Organization For (Active)
- Definitive Standard
- Definitive Standard
- BS EN ISO7089
- K7766 - Bsi Standards Limited (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- NE2003563
- K0407 - Rbsl Washington (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 5310-99-981-6544
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100