5310-99-970-8625

Flat Washer

5310999708625 999708625 BS3410 FV619220 KS7080-273 GMA51461 910-031-0195 9100310195 9067038 FV749250-180 FV965680ITEM71 42046V 4890 5310-027247 5310-029249 BS3410-(TABLE 4)-3/8DIA-MSCP 99-256-3059 411010060 446363 6510705 25E17

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer