5310-99-967-5697

Flat Washer

5310999675697 999675697 0/5507/001/15 003504619/67 0/5507/001 ITEM 15 003504616/DT/053 2/2030/003 ITEM 32 003504616 ITEM 43 003504616/43 003504619 ITEM 67 4/2030/003 ITEM 32 4/5507/002 ITEM 15 4/5507/002/15 0/2075/001/29

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer