5310-99-946-8792

Flat Washer

5310999468792 999468792 SP127-A 98440120 30-298-116-03 SP127A C0M7512-1 PL40-12214/42 4710703 401607 A3320-0011-001 B02135 21171-422-0 991-4-00222-001 2513-700-01081 504156 PL40-12214 ITEM 42 SP127 5UE10164 21272038704 3320-0011-001

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer