5310-99-943-9073
Flat Washer
5310999439073 999439073 ELA35608 ELA35608-2 0413-943-9073
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-943-9073
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-943-9073 4+ Documents (More...)
Flat Washer 5310999439073 999439073,ELA35608 5310-99-943-9073 5310999439073 999439073 is a washer
Flat Washer 5310999439073 999439073,ELA35608 5310-99-943-9073 5310999439073 999439073 is a washer
-1 ELA35608 0413-943-9045 A washer having a centrally located hole with a solid or laminated cross-section
NumberManufacturerStatusELA35608-1 K0216 - Thales Uk Limited Dba Thales Uk Ltd (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 ELA35608
Restrictions 5310-99-943-9073
Approved Sources 5310-99-943-9073
- Part Number
- Manufacturer
- Status
- ELA35608-2
- Manufacturer
- K0216 - Thales Uk Limited Dba Thales Uk Ltd (Active)
- Primary Buy
- Primary Buy
- ELA35608
- K0216 - Thales Uk Limited Dba Thales Uk Ltd (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 0413-943-9073
- U1278 - Ministry Of Defence (Navy) (Obsolete)
- NATO Reference
- NATO Reference