5310-99-941-9454

Flat Washer

5310999419454 999419454 SP10-C 991-4-00044-003 991-4-0044-003 R427408 FV 887373 ITEM37 C0M86G B01668 4A1446 0D50069P24 FV 747009 ITEM71 SP10 SP10C 7980-0258-007 1T20PDGW17-0016 FV 791190 ITEM13 5310-841038 28W12245 28W9419454 36AF1958

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer