5310-99-941-8639

Flat Washer

5310999418639 999418639 BS3410 C98 5/48/03087/01/173 31191S1 137NM31989 95282/1ITEM29 TGS208/K 1161461B100 QCA/5/48/03087/01/173 92560/3 ITEM 69 P29 669-39-063 30637 FL83/7 Y030 156 08 9019356 1410-0007 910-031-0024 89434 ITEM 5 901/9356 027-00546 3300 TS208/K/M1LDST/Z FV 661154 ITEM 31 FV 661154/31

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer