5310-99-941-8615

Flat Washer

5310999418615 999418615 BS3410 MR220A3954 12-8-3 S4-9 26P-9 EPGT75716 013110 1410/0009 2005A9 PGT75716 15209 MR220A3954 REF 13 MR220A3954/13 I.F.2005A9 6MT59717 LV8REAB26P9 61SY40105 962824 962824S1 5310-029187 CA029027 BS3410-7/8INDIAUNCST 1410/0009Z 5310-029027

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer