5310-99-941-8571

Flat Washer

5310999418571 999418571 BS3410 6475507B GM-E-111486-S 6475507B/61 FV987322-44 26090 2141-5823K BL/E1017/15/5 GM-E-111486/147 C20592 ITEM 57 9100300022 9100300022 ISSUE 4 JRB4392 A4/2088/P/32 ITEM 9 A4/2088/P/32/9 Y26090 WA704065 T201599M/20 30ZS80261SLR4359 99-244-4070 83903333 TABLE 1 AMERICAN NO. SIZE 6 940120 569423 37457

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer