5310-99-941-8543

Flat Washer

5310999418543 999418543 BS3410 703010300959 FV 953147 ITEM 22 30ZS820190000081 D55777 ITEM 16 1414-0011 S21-2Z E40023-14 ND13493Q 904242 89434 ITEM 181 0079067605 FV 661154 ITEM 22 FV 766756 ITEM 16 FV987322-42 79067605 9067605 E400231TEM14 FV 661154/22 675 0160 FV 766756-16 901/9336 39-2092 6449K167/10 ITEM 63 6449K167/10/63

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer