5310-99-800-4151

Flat Washer

5310998004151 998004151 KL44519 PGT75175 5136-038 SP1743A1TEM125 SP1743B/109 SP1743B109 81-2123 PG75175 271450200884 5048-01 560006073 LKL44519 1049588 722471 16L10780 3H693 FL59-15 41722471 44519 KL4588 5-1200-270

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer