5310-99-793-8946
Flat Washer
5310997938946 997938946 Z/520/0062/0046 PART 218 Z/520/0062/0046/218 JT21346-13 SSN13/Z/520/0062/0046 PART 218 SSN13/Z/520/0062/0046/218 21346-13
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-793-8946
Request a Quotation from participating marketplace vendors
Restrictions 5310-99-793-8946
End Users 5310-99-793-8946
- United Kingdom (ZK)
Approved Sources 5310-99-793-8946
- Part Number
- Manufacturer
- Status
- JT21346-13
- Manufacturer
- U2164 - James Walker & Co Ltd (Replaced)
- Primary Buy
- Primary Buy
- Z/520/0062/0046 PART 218
- K6451 - Bae Systems Marine Limited (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- Z/520/0062/0046/218
- K6451 - Bae Systems Marine Limited (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SSN13/Z/520/0062/0046 PART 218
- K6451 - Bae Systems Marine Limited (Active)
- Secondary Buy
- Secondary Buy
- SSN13/Z/520/0062/0046/218
- K6451 - Bae Systems Marine Limited (Active)
- Secondary Buy
- Secondary Buy
- 21346-13
- U2164 - James Walker & Co Ltd (Replaced)
- Secondary Buy
- Secondary Buy