5310-99-786-3949
Flat Washer
5310997863949 997863949 BS4320 BS4320 TABLE 1 FORM A N 3501 043 X
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-786-3949
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-786-3949 5+ Documents (More...)
centrally located hole with a solid or laminated :TABLE 1:FORM A-M8 BS4320-TABLE 1 BS4320-TABLE 1 FORM
A M8 A washer having a centrally located hole :TABLE 1:FORM A -M8 BS4320-TABLE 1 BS4320-TABLE 1 FORM
-TABLE 1-FORM A BS4320-TABLE 1:FORM A BS4320:TABLE 1 A00192 BS4320 TABLE 1 FORM A M4 A washer having
-TABLE 1 FORM A M4 BS4320 TABLE 1 FORM A M4 293002-2137 BS4320M4FORMACADST TABLE 1 FORM A SIZE M4 A washer
TABLE 1 FORM A BS4320:TABLE 1 A00192 BS4320 TABLE 1 FORM A M4 A washer having a centrally M4 BS4320
TABLE 1 FORM A M4 293002-2137 BS4320M4FORMACADST TABLE 1 FORM A SIZE M4 A washer BS4320 TABLE 1 FORM
TABLE 1 FORM A BS4320 TABLE 1 FORM A M3 A washer having a centrally located hole with a solid or laminated
-TABLE 1:FORM A BS4320:TABLE 1 A00192 BS4320 TABLE 1 FORM A M4 A washer having a centrally FORM A BS4320
located hole :TABLE 1:FORM A -M8 BS4320-TABLE 1 BS4320-TABLE 1 FORM A M8 Flat Washer 5310997850847997850847
-TABLE 1 BS4320-TABLE 1 FORM A M8 A washer having a centrally located hole :TABLE 1:FORM A -M8 BS4320
Restrictions 5310-99-786-3949
End Users 5310-99-786-3949
- Brazil (YA)
- Spain (YB)
- United Kingdom (ZK)
- Turkey (ZW)
Approved Sources 5310-99-786-3949
- Part Number
- Manufacturer
- Status
- BS4320
- Manufacturer
- K7766 - Bsi Standards Limited (Active)
- Incomplete Standard
- Incomplete Standard
- BS4320 TABLE 1 FORM A
- K7766 - Bsi Standards Limited (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- N 3501 043 X
- K0169 - British Aerospace Defence Ltd (Royal (Active)
- Secondary Buy
- Secondary Buy
Similar Supply Items to 5310-99-786-3949
