5310-99-785-0847
Flat Washer
5310997850847 997850847 BS4320-TABLE 1 FORM A M8 BS4320 TABLE 1 FORM A M8 293002-2135 TABLE 1 FORM A SIZE M8
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-785-0847
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-785-0847 5+ Documents (More...)
5310-99-785-0847 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99-785-0847
A washer having a centrally located hole with a solid BS4320-TABLE 1 BS4320-TABLE 1 FORM A M8
BS4320-TABLE 1 BS4320-TABLE 1 FORM A M8 A washer having a centrally https//www.nsnlookup.com
/fsg-53/fsc-5310/uk 5310-99-785-0847 Flat Washer 5310997850847 997850847 BS4320 TABLE 1 FORM A M8 293002
A washer having a centrally located hole with a solid BS4320-TABLE 1 BS4320-TABLE 1 FORM A M8
BS4320-TABLE 1 BS4320-TABLE 1 FORM A M8 A https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310
Flat Washer 5310997850847 997850847 -TABLE 1 BS4320-TABLE 1 FORM A M8 A washer having a centrally
BS4320M4FORMACADST TABLE 1 FORM A SIZE M4 A washer https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99-785-0847
Flat Washer 5310997850847 997850847 -TABLE 1 BS4320-TABLE 1 FORM A M8 A washer having a centrally
located hole :TABLE 1:FORM A -M8 BS4320 -TABLE 1 BS4320-TABLE 1 FORM A M8 BS4320-TABLE 1 BS4320-TABLE
Restrictions 5310-99-785-0847
Approved Sources 5310-99-785-0847
- Part Number
- Manufacturer
- Status
- BS4320-TABLE 1 FORM A M8
- Manufacturer
- K7766 - Bsi Standards Limited (Active)
- Incomplete Standard
- Incomplete Standard
- BS4320 TABLE 1 FORM A M8
- K7766 - Bsi Standards Limited (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 293002-2135
- U6441 - Atlantic Inertial Systems Limited (Active)
- Secondary Buy
- Secondary Buy
- TABLE 1 FORM A SIZE M8
- K7766 - Bsi Standards Limited (Active)
- NATO Reference
- NATO Reference
Similar Supply Items to 5310-99-785-0847
