5310-99-721-0960
Flat Washer
5310997210960 997210960 348-1513
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-721-0960
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-721-0960 3+ Documents (More...)
RQST NE Updated Every Day 4720-01-348-1513 RQST Updated Every Day 4720-01-348-1513 RQST NE Restrictions
4720-01-348-1513 DEMIL: A | DEMILI : | CRITICALITY : X | HMIC : N | PMIC : A | EDC: | ADPEC : 4720-01
United States (US) 4. 1095-00-348-1513 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Restrictions 1095-00-348-1513 DEMIL
Restrictions 5310-99-721-0960
Approved Sources 5310-99-721-0960
- Part Number
- Manufacturer
- Status
- 348-1513
- Manufacturer
- U1000 - Gec Marconi Sensors Ltd (Replaced)
- Primary Buy
- Primary Buy