5310-99-709-4485

Flat Washer

5310997094485 997094485 001280377 001280377/039 SSK.M.603.00.0003 SSK.M.603.00.0003/039 001280377 SHEET 039 SSK.M.603.00.0003 SHEET 039 001280377 SHEET 050 SSK.M.603.00.0003/268 001280377/050 SSK.M.603.00.0003 PART 268 SSK.M.603.00.0003 SHEET 050 SSK.M.603.00.0003/050

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer