5310-99-668-1621

Flat Washer

5310996681621 996681621 4A62-X3-331 85100-04366/20 85100-04368 ITEM 20 85100-04368/20 85100-06541 ITEM 20 85100-06541/20 85100-06551 ITEM 20 85100-07499 ITEM 20 85100-07499/20 85100-07500 ITEM 20 85100-07500/20 85100-11362 ITEM 20 85100-11362/20 85200-03119 ITEM 20 85200-03119/20 85200-03122 ITEM 20 85200-06542/20 85100-03120 ITEM 20 85100-03120/20 85100-04366 ITEM 20 85100-06551/20 85100-07495 ITEM 20 85100-07498 ITEM 20 85100-07498/20 85100-07506 ITEM 20

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer