5310-99-595-4454

Flat Washer

5310995954454 995954454 SSK/M/148/94/0001 SHEET 008 ISS- 001279462 001279462 PART 237 SSK/M/148/94/0001/008 SSK/M/148/94/1 SSK/M/148/94/1 SHEET 4 SSK/M/148/94/1/237 001279462/04 001279462/237 SSK/M/148/94/0001 SSK/M/148/94/1 PART 237 001279462 SHEET 04 001279462/008 001279462 SHEET 008 SSK/M/148/94/1/4

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer